EEVblog Electronics Community Forum
Electronics => PCB/EDA/CAD => Eagle => Topic started by: Pack34 on August 19, 2012, 05:57:35 pm
-
I'm looking at dropping a few board designs soon under OSHW and was wondering if anyone knew of a good way to get the logo on my boards.
I've seen some for gEDA but I haven't had much luck with Eagle.
-
There is one in the sparkfun eagle library.
-
There is one in the sparkfun eagle library.
Thank you very much!
-
http://oshwlogo.com/ (http://oshwlogo.com/)