Oval pads for HDMI connector

[otrab]

Hi guys

With a friend we designed a pcb that have some HDMI connectors. For this we need to make some oval pads, as the image.
Does anyone know how to do it?


We will manufacture it in Seeedstudio. We asked in the online support but we still have no answer.

[wraper]

This is not oval https://en.wikipedia.org/wiki/Stadium_(geometry)#cite_note-2
https://en.wikipedia.org/wiki/Oval

[ebclr]

Check if you don't find the connector read here

http://www.we-online.com/web/en/electronic_components/toolbox_pbs/Eagle_eiCan.php

[otrab]

yeah, it's not oval. It's a Stadium shape

thanks ebclr for the link. Here I found some HDMI connectors

http://www.we-online.com/web/en/index.php/download/media/07_electronic_components/toolbox_1/eagle/Input-Output_Connectors_rev15d.lbr

[free_electron]

Those are slot milled pads. Yu set this up in the CAD program as a slot. then provide a callout on the mechnical layer with slot dimensions.

[otrab]

great but how to be sure that Seeedstudio will metallize this pads?

I need some other specification?

[ebclr]

Seedstudio are pro guys.

Just write down a coment