Author Topic: JST XH 2.54 Right Angle Library  (Read 6791 times)

0 Members and 1 Guest are viewing this topic.

Offline beicTopic starter

  • Newbie
  • Posts: 3
  • Country: cs
JST XH 2.54 Right Angle Library
« on: February 05, 2021, 08:00:44 pm »
Hi there,

Does anyone know where can I find Eagle library v7.6 for JST XH 2.54mm right angle connectors (2P, 3P, 4P, 5P and 6P)?



Thank you!
 

Offline BroMarduk

  • Supporter
  • ****
  • Posts: 78
  • Country: us
Re: JST XH 2.54 Right Angle Library
« Reply #1 on: February 13, 2021, 01:09:22 am »
Here are 2-5 at SnapEDA.  I was just picking these up myself recently.  These are the official JST versions, so the ones you show in the picture may differ slightly in look.  SnapEDA requires a registration, but its free.

S2B-XH-A(LF)(SN)  https://www.snapeda.com/parts/S2B-XH-A%28LF%29%28SN%29/JST%20Sales/view-part/
S3B-XH-A(LF)(SN)  https://www.snapeda.com/parts/S3B-XH-A%28LF%29%28SN%29/JST%20Sales/view-part/
S4B-XH-A(LF)(SN)  https://www.snapeda.com/parts/S4B-XH-A%28LF%29%28SN%29/JST%20Sales/view-part/
S5B-XH-A(LF)(SN)  https://www.snapeda.com/parts/S5B-XH-A%28LF%29%28SN%29/JST%20Sales/view-part/

You can download the 3D STEP files from JST if you register for the 6-pin (https://www.jst-mfg.com/product/detail_e.php?series=277) and the ones without 3-D images.

And it shouldn't be too hard to modify the part for the 6pin with the 5pin files.

 
The following users thanked this post: beic

Offline beicTopic starter

  • Newbie
  • Posts: 3
  • Country: cs
Re: JST XH 2.54 Right Angle Library
« Reply #2 on: February 13, 2021, 04:25:43 pm »
Here are 2-5 at SnapEDA.  I was just picking these up myself recently.  These are the official JST versions, so the ones you show in the picture may differ slightly in look.  SnapEDA requires a registration, but its free.

S2B-XH-A(LF)(SN)  https://www.snapeda.com/parts/S2B-XH-A%28LF%29%28SN%29/JST%20Sales/view-part/
S3B-XH-A(LF)(SN)  https://www.snapeda.com/parts/S3B-XH-A%28LF%29%28SN%29/JST%20Sales/view-part/
S4B-XH-A(LF)(SN)  https://www.snapeda.com/parts/S4B-XH-A%28LF%29%28SN%29/JST%20Sales/view-part/
S5B-XH-A(LF)(SN)  https://www.snapeda.com/parts/S5B-XH-A%28LF%29%28SN%29/JST%20Sales/view-part/

You can download the 3D STEP files from JST if you register for the 6-pin (https://www.jst-mfg.com/product/detail_e.php?series=277) and the ones without 3-D images.

And it shouldn't be too hard to modify the part for the 6pin with the 5pin files.

Thank you BroMarduk,

And what do you think about these ones? Just found them by accident...
https://www.diymodules.org/eagle-show-library?type=shr&id=53
https://www.diymodules.org/eagle-show-library?type=usr&id=1012211612&part=Rembrandt+Electronics+-+JST+XH+Connectors+v1-0.lbr
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf