Author Topic: Design and simulation software to start with  (Read 4048 times)

0 Members and 1 Guest are viewing this topic.

Offline G7PSK

  • Super Contributor
  • ***
  • Posts: 3807
  • Country: gb
  • It is hot until proved not.
Design and simulation software to start with
« on: February 20, 2012, 10:33:34 pm »
I am looking for software for general electronic design and simulation and then for board layout. Not having used any of this before what would be good ones to start with. I don't want to have to lay out thousands for CAD programs but don't mind paying something for a reasonable program. What would you recommend please.
 

Offline IanB

  • Super Contributor
  • ***
  • Posts: 10369
  • Country: us
Re: Design and simulation software to start with
« Reply #1 on: February 20, 2012, 10:38:10 pm »
For simulation, spice seems to be the standard. I have been trying LTspice, and although it works nicely with the supplied library of LT components, it seems to have trouble when I import models from other vendors. It might be that PSpice works better, but I'm not sure if it has a free version.
I'm a ChemE--I know all about the flow of fluids.
 

Offline harnon

  • Regular Contributor
  • *
  • Posts: 215
  • Country: au
  • Is this thing on?
    • My Personal Website
Re: Design and simulation software to start with
« Reply #2 on: February 20, 2012, 10:52:47 pm »
My toolkit:
LT Spice IV (free) for simulation - admittedly not much yet :D
Diptrace (free/paid) for schematics and PCBs.  I'm on the free "hobbyist" version which is 500 pins, 2 signal layers, unlimited plane layers.
GerbV for viewing gerbers before manufacturing

I'm not sure how good integration will be between Diptrace/LTSpice to be honest as I only used them separately, although Diptrace can export in about 8-10 different netlist formats. Diptrace is pretty week on the project management side (e.g. you basically just save all your files in a folder and manage them yourself) but other than its pretty good to get started on. 

In the past I also used Eagle which I think is ok, but a quick search on the forum will show you its kind of disliked :D.  I just installed (dual boot) ubuntu on my windows pc to try out kicad, geda etc but as I don't have a wired keyboard I can't actually access the installation (the keyboard is not recognised until windows loads up so I can't select the Ubuntu partition!)  I have tried Kicad on my windows machine but found it so-so.
 

Offline steve_w

  • Regular Contributor
  • *
  • Posts: 190
  • Country: au
Re: Design and simulation software to start with
« Reply #3 on: February 21, 2012, 04:27:02 am »
I'm in the same boat, I have used eagle and am moving to diptrace based on what I have seen here, any feed back on open source (free) tools and experience with them would be greatly appreciated.

So long and thanks for all the fish
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf