Author Topic: Tool for modelling LF 125 kHz antenna fields inside a vehicle  (Read 553 times)

0 Members and 1 Guest are viewing this topic.

Offline karthiks

  • Newbie
  • Posts: 2
  • Country: us
Hi all,

I am working on designing a comprehensive TPMS/PEPS system.

And right now in the process of analysing the LF antenna field patterns that operate on 125kHz and their coverage.

What CAD tool is the best for modelling such low frequencies (125kHz) since its a magnetoquasistatic field?

I am currently investigating FEKO and its pros and cons. I will update my findings here.

Thanks in advance
-Karthik
 

Offline free_electron

  • Super Contributor
  • ***
  • Posts: 7673
  • Country: us
    • SiliconValleyGarage
Re: Tool for modelling LF 125 kHz antenna fields inside a vehicle
« Reply #1 on: May 21, 2019, 03:17:11 pm »
Comsol ?
Professional Electron Wrangler.
Any comments, or points of view expressed, are my own and not endorsed , induced or compensated by my employer(s).
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf