EPickNPlace or SmtAssistant with Altium

[luky315]

Is anyone successfully using
EPickNPlace (https://www.eigerdesign.com/epicknplace.html)
or the "original"
SmtAssistant (https://www.alciom.com/en/smtassistant/)
and has found out how to configure Altium to export a pick&Place file which is directly usable with these tools for manual placement?
I got a lot of errors and had no success :-(
There is a problem With the PKP file: 0001: X cannot be parsed to an float value ()

[PlainName]

I've used SMTassistant with P&P from Altium. I've attached screen caps from the outjobs dialog, and the specific assembly output configuration.

[Doctorandus_P]

Are you aware of "Interactive HTML Bom"? It is a similar program, and it may be worth looking into. It is designed around KiCad, but KiCad's importer for altium files has also gotten quite good.

[PlainName]

Thanks for reminding us of that, Doctorandus_P. There is in fact a port to Altium which runs as an addon:

https://boastools.com/

[luky315]

I knew "Interactive HTML Bom" but Boastools are new for me - they look really great, no need for EPickNPlace or SmtAssistant anymore! Thanks!!!