Low cost EMI gaskets for aluminium enclosure?

[Martin F]

Hi all,

We're looking for a low cost EMI gasket set, similar to blue in the attached image.

We were hoping to find something along the lines of 0.5-1.5 EUR per set (i.e. per 2 pieces).
However, so far it seems closer to 10 EUR with most suppliers we've contacted.

Do you know of any manufacturers that provide these at lower costs?
Or alternative solutions we might consider? (we need our end plates to connect tightly with our body enclosure for EMC purposes).

Any suggestions would be greatly appreciated.

Best,
Martin

[Gribo]

First, this post should be in the projects and designs forum not in CAD/EDA.
Second, What is your PCB size? It looks to be a standard extruded enclosure. If so, check https://www.bopla.de/en/enclosure-technology/product/alubos.html for enclosures with EMC seals.

[Martin F]

Sorry for the mistake - the enclosure has rounded corners - I've attached a pic.
The other picture was just to clarify what I meant by EMI shields.

Best,
Martin

[babysitter]

I never thought that i suggest WUERTH as cheaper.... but Wuerth. Have a look at WE-LT, for example.