Author Topic: eagle measurement backwards  (Read 1476 times)

0 Members and 1 Guest are viewing this topic.

Offline willbanks

  • Contributor
  • Posts: 35
  • Country: us
eagle measurement backwards
« on: June 24, 2017, 07:13:01 pm »
whenever i try to use the measurment tool in eagle for board design, the numbers are backwards in all directions.

attached picture for example. how can i fix this?
hobbyist. diy synths.
 

Online jpanhalt

  • Super Contributor
  • ***
  • Posts: 2157
  • Country: us
Re: eagle measurement backwards
« Reply #1 on: June 24, 2017, 07:28:35 pm »
Switch to TOP layer (layer 1)

John

Edit: For the measurement, even if item is on bottom
Edit2: Or any layer that is natively top, e.g., info, dimension, and so forth.
« Last Edit: June 24, 2017, 09:11:32 pm by jpanhalt »
 
The following users thanked this post: willbanks

Offline willbanks

  • Contributor
  • Posts: 35
  • Country: us
Re: eagle measurement backwards
« Reply #2 on: June 24, 2017, 08:40:22 pm »
thanks!
hobbyist. diy synths.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf