Author Topic: Micro-Cap 12 import model problem  (Read 3739 times)

0 Members and 1 Guest are viewing this topic.

Offline yabba235Topic starter

  • Contributor
  • Posts: 36
  • Country: pl
Micro-Cap 12 import model problem
« on: February 26, 2024, 04:18:42 pm »
I can't propelly import model PA443 hv op amp into MC12.
When start simulate I got message:
Error: Illegal use of reserved variable or symbol, 'DT'.
Text:   .MODEL DT D
File:   C:\MC12\data\circuit2.cir
.Subckt:   X2 calls PA443
Any help ?

Offline kashinath

  • Newbie
  • Posts: 4
  • Country: in
Re: Micro-Cap 12 import model problem
« Reply #1 on: March 06, 2024, 07:33:17 am »
It is because DT is a Micro-cap reserved symbol. In .lib file change all instances of "DT" to something like "DTTT" before import.
The modified lib file is attached.
The following users thanked this post: yabba235

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo