Electronics > PCB/EDA/CAD

Micro Cap Help needed

(1/2) > >>

paffii:


Hello,

this post can be closed. I did mistakes in shorting some wires in components, error found :-)



Hello,

i am a beginner in spice and only a little hobbyist in electronic. I want to simulate a schematic from a book. In real it works fine but in Micro cap the output is not real.
It is a booster from 12 to 200V and maybe here is someone who is working with Micro cap to view my schematic? This would be nice..in the attachement my files

Greets

Andreas

paffii:
sorry, i forgot the schematic..

thm_w:
Its working as you uploaded, just the voltage is not that high? Is that what you are worried about?

Where did the schematic come from, any reason you didn't use this configuration: https://theorycircuit.com/boost-converter-circuit-555/

paffii:
oh, i made a big fault, sorry. I saw that the Diode D1 is wrong (shortened). I have to change this error at once..

paffii:
i removed the error, but still there is no output voltage..

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod