« previous next »
Pages: [1]   Go Down

Author Topic: problem controlling variable DC-DC LTC1261LCS8-4  (Read 2906 times)

0 Members and 1 Guest are viewing this topic.

Offline john23Topic starter

  • Regular Contributor
  • *
  • Posts: 114
  • Country: aq
problem controlling variable DC-DC LTC1261LCS8-4
« on: April 14, 2024, 08:58:42 am »
Hello,In the datasheet shown below they say that the output resistance could be controlled using the COMP pin as shown in the links below.
I have tried to simulate this component in LTSPICE.
However I cannot understand the datasheet regarding how exactly do I need to use the COMP pin for tuning the output voltage?
LTSPICE  and phots are attached in the link.( I dont know other ways to present here photos and simulation files :-)
Thanks.

https://www.analog.com/media/en/technical-documentation/data-sheets/1261lfa.pdf

https://ibb.co/WtvMYws
https://ibb.co/vLyCjr5
https://easyupload.io/4s197x
Logged
 

Offline iMo

  • Super Contributor
  • ***
  • Posts: 5054
  • Country: bt
Re: problem controlling variable DC-DC LTC1261LCS8-4
« Reply #1 on: April 14, 2024, 09:30:42 am »
Your part is not adjustable, it seems..
The Adjustable parts should not end with the suffix -4 or -4.5..
« Last Edit: April 14, 2024, 09:32:19 am by iMo »
Logged
 
The following users thanked this post: john23
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee