Author Topic: AOYUE FEK-01  (Read 3246 times)

0 Members and 1 Guest are viewing this topic.

Offline klaus11

  • Supporter
  • ****
  • Posts: 156
  • Country: 00
AOYUE FEK-01
« on: August 09, 2018, 05:04:09 am »
New fume extractor.

« Last Edit: October 15, 2018, 07:04:30 am by klaus11 »
HP3458A, HP3245a, Keithley 2000, Fluke 87V, Rigol DP832, TEK TDS5052B, HP33120A
 

Offline blueskull

  • Supporter
  • ****
  • Banned!
  • Posts: 12433
  • Country: cn
  • Power Electronics Guy
Re: Aoyue FK-01
« Reply #1 on: August 09, 2018, 05:11:23 am »
FK-01... Sounds offensive.
 
The following users thanked this post: jeremy

Offline klaus11

  • Supporter
  • ****
  • Posts: 156
  • Country: 00
Re: AOYUE FEK-01
« Reply #2 on: August 09, 2018, 05:17:48 am »
Thank, exactly FEK-01.
HP3458A, HP3245a, Keithley 2000, Fluke 87V, Rigol DP832, TEK TDS5052B, HP33120A
 

Offline thm_w

  • Super Contributor
  • ***
  • Posts: 1494
  • Country: ca
Re: AOYUE FEK-01
« Reply #3 on: August 09, 2018, 08:50:47 pm »
https://www.aoyue.eu/aoyue-fek-01-led-solder-smoke-absorber-fume-extractor-extraction-arms.html $300 CAD for this is incredibly reasonable. The problem is shipping cost would be almost that much.

Might borrow the idea of putting an LED at the top of the fume extractor, as it blocks overhead lighting.
 

Offline ercapoccia

  • Contributor
  • Posts: 23
Re: AOYUE FEK-01
« Reply #4 on: March 07, 2019, 03:48:58 am »
Just got one, it was just €180 shipped in EU. It is a bit loud, but it is reasonably well built and powerful enough for my needs.
Can't go wrong with the price. I do board repairs just a couple of days a mounth. If i had to use every day i would have probably bought the hakko fa430
 

Offline xmetal

  • Contributor
  • Posts: 35
  • Country: gb
Re: AOYUE FEK-01
« Reply #5 on: August 23, 2019, 11:22:01 pm »
I hope I'm not dragging up an old thread but I've just got myself the FEK-01 fume extractor. It is a bit noisy and I think the inlet hoses are a little on the stiff side. Other than that I find it works quite well and feels quite solid. I did look for the Hakko FA430 but didn't see it for sale this side of the pond.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf