Author Topic: AC/DC bidirectional battery charger/discharger Firmware/Hardware simulation  (Read 534 times)

0 Members and 1 Guest are viewing this topic.

Offline Md Mubdiul Hasan

  • Regular Contributor
  • *
  • Posts: 186
  • Country: kr
  • Lets learn more to be more inspired in Electronics
Hi,

My project diagram is similar to this idea,


Lets  say input is 3p 380VAC, 60Hz, Main Transformer MTR runs at 20kHz, DC output should be 50-147 v, charging current 100A. Should have CC and CV mode of operation.

I need to implement FW with following facilities,

1. Shunt/ Temperature sensing

2. 3v AC to 16 bit ADC having channel current and voltage

3. CAN/SPI/SCI protocol

4. PF correction, PI or PID control

5. PWM for high frequency switching.

KIndly suggest any simulation model/ EVM board/tools to understand the system.
Hasan
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf