Products > Embedded Computing
Allwinner's H3, which Linux kernel?
DiTBho:
As usual .... DietPC and these distos, are all a mess of broken things
--- Code: ---=> env save
Saving Environment to FAT... Card did not respond to voltage select!
Failed (1)
--- End code ---
U-boot, as installed by DietPC
bingo600:
I have been using "Armbian" on my OrangePi's
But haven't made any kernel mods yet.
/Bingo
DiTBho:
k4.* doesn't properly work, too many repositories, all messed up.
I give-up with kernel v4.*
Good news, K5.1* start to move. I am with 5.12.0
- 1core/SMP: works!
- 3 serial lines: work
- 3 usb lines: work
- usb otg: disabled
- clock fixed to 500Mhz
- no overheating
I will spend the next week fixing u-boot.
Whales:
--- Quote from: DiTBho on July 03, 2021, 01:32:50 pm ---- no overheating
--- End quote ---
Hooray :) Glad you're getting it to work. Publish your stuff if you can.
I presume you're fixing the clock so you can fix the vreg setting to something low and not worry about anything more complicated?
DiTBho:
--- Quote from: Whales on July 06, 2021, 11:57:54 am ---I presume you're fixing the clock so you can fix the vreg setting to something low and not worry about anything more complicated?
--- End quote ---
Yup, precisely.
Navigation
[0] Message Index
[*] Previous page
Go to full version