Author Topic: Any way to temporarily suppress all radio on Pi Zero (to lower interference)?  (Read 575 times)

0 Members and 1 Guest are viewing this topic.

Online Tamiore

  • Contributor
  • Posts: 16
  • Country: kz
Hi everyone,

Long story short: Raspberry Pi Zero is being used to run a secondary camera on a drone.
After boot-up I SSH into the board (via wi-fi the board itself generates), do some setup and checkup, and get the camera running (recording video).
At this point I want to completely suppress all radio signals from the board, as they create noticeable interference for the drone uplink (hardly surprising, as there isn't any space onboard to separate the two boards by more than a few centimeters).

Any ideas what command (or script) would be best to temporarily suppress all radio (namely wifi and Bluetooth) until the next boot-up?
« Last Edit: September 12, 2022, 08:23:08 am by Tamiore »
 

Offline eutectique

  • Regular Contributor
  • *
  • Posts: 216
  • Country: be
Say something like
Code: [Select]
ip link set dev wlan0 downor
Code: [Select]
ifconfig wlan0 down
 

Online alm

  • Super Contributor
  • ***
  • Posts: 2222
  • Country: 00
 
The following users thanked this post: SiliconWizard


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf