Author Topic: (FS) Xilinx Virtex 5 evaluation board XUPV5 (ML505/ML509)  (Read 2994 times)

0 Members and 1 Guest are viewing this topic.

Offline xtechTopic starter

  • Regular Contributor
  • *
  • Posts: 78
  • Country: pl
(FS) Xilinx Virtex 5 evaluation board XUPV5 (ML505/ML509)
« on: November 08, 2015, 07:18:10 pm »
I want to sell Xilinx Virtex 5 board. Made by Digilent, model XUPV5 - it is ML505 but with upgraded (larger) FPGA. Reference platform for 64-bit OpenSparc T1 by Sun (now Oracle).

Specification:
FPGA XC5VLX110T
256MB SO DIMM (DDR2), 1MB sychronous SRAM, 32MB parallel flash, 2MB spi flash, 8KB I2C EEPROM
LCD 2x16 display
PCI express x1
VGA input
VGA and DVI output
Ethernet
Audio codec
More in manual (page 11): http://www.xilinx.com/support/documentation/boards_and_kits/ug347.pdf

Kit included: board, usb jtag programmer, power supply (with three different endings for EU, UK and US), CF card, sata cable, DVI->VGA

There is image of OpenSparc T1 with OpenSolaris already recorded on CF card (CFG0) but the original samples are also there (CFG1-7). I've used this board mostly for image processing project (because it has VGA input) but played with 64-bit OpenSparc too. Used but fully tested and working.

Price 420 euro.
 

Offline corestore_org

  • Newbie
  • Posts: 1
  • Country: nz
Re: (FS) Xilinx Virtex 5 evaluation board XUPV5 (ML505/ML509)
« Reply #1 on: November 27, 2015, 11:17:18 am »
Check your messages :-)
 

Offline piyumalranawaka

  • Newbie
  • Posts: 2
  • Country: th
Re: (FS) Xilinx Virtex 5 evaluation board XUPV5 (ML505/ML509)
« Reply #2 on: May 29, 2016, 11:21:50 am »
Hi,

Is it still available??
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf