Electronics > FPGA

Altera A-C2FB kit ( board documentation )

<< < (3/3)

miguelvp:
By looking at the picture you have two 10 pin connectors, the silk screen is telling you that the one on the left is the JTAG (J856) and the one on the right is the AS (J6).

The 10 pin header is keyed and the cable supplied would be keyed as well.

Maybe an Arrow BeMicro Max10 would be a better starting kit:
https://www.arrow.com/en/products/bemicromax10/arrow-development-tools/#page-1

Altera has a nice wiki for it too:
http://www.alterawiki.com/wiki/BeMicro_MAX_10

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version