EEVblog Electronics Community Forum
A Free & Open Forum For Electronics Enthusiasts & Professionals
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
This topic
This board
Entire forum
Google
Bing
Home
Help
Search
About us
Links
Login
Register
EEVblog Electronics Community Forum
»
Electronics
»
FPGA
»
FPGA & CPLD Marking & Part Number - Replacement
« previous
next »
Print
Search
Pages: [
1
]
Go Down
Author
Topic: FPGA & CPLD Marking & Part Number - Replacement (Read 1053 times)
0 Members and 1 Guest are viewing this topic.
2X
Frequent Contributor
Posts: 385
Country:
FPGA & CPLD Marking & Part Number - Replacement
«
on:
January 16, 2025, 11:02:35 pm »
Hello,
I have the below FPGA and CPLD. The CPLD writes on it some codes as the FPGA as well. Could you tell me if the part numbers where I have found are right? Also, the FPGAs from the AliExpress and ebay are trusted or it depends or absolutely No?
CPLD Part Number: XC2C64A-7VQG100C
FPGA Part Number: XC4VSX35-11FF668C (can I will use the XC4VSX35-11FF668
I
(
I = Industrial
) where it has Temperature Range: (TJ = –40°C to +100°C) or it has and other differences?
XC4VSX35-11FF668I
- aliexpress
https://www.aliexpress.com/w/wholesale-XC4VSX35%2525252d11FF668I.html?g=y&SearchText=XC4VSX35-11FF668I&sortType=price_asc
XC4VSX35-11FF668C
- ebay
https://www.ebay.com/sch/i.html?_nkw=+XC4VSX35-11FF668C+&_sacat=0&_from=R40&_trksid=p2332490.m570.l1313
Logged
jocjosoe
Newbie
Posts: 2
Country:
Re: FPGA & CPLD Marking & Part Number - Replacement
«
Reply #1 on:
January 17, 2025, 07:09:07 am »
XC4VSX35-11FFG668C & XC2C64A-7VQG100C,This is the correct PCN. Our company often uses WHL to test it. It is relatively safe. The ones on these shopping websites are not reliable. If you need, we can communicate more.
Logged
WhatsApp & WeChat: +85265837594
The following users thanked this post:
2X
2X
Frequent Contributor
Posts: 385
Country:
Re: FPGA & CPLD Marking & Part Number - Replacement
«
Reply #2 on:
January 17, 2025, 07:46:58 am »
G is lead FREE as I read on the datasheet, so if I buy this XC4VSX35-11FF668C without G it will be a problem? I believe the only difference is the soldering temperature profile because this part number without G will have lead on soldering balls.
Logged
jocjosoe
Newbie
Posts: 2
Country:
Re: FPGA & CPLD Marking & Part Number - Replacement
«
Reply #3 on:
January 17, 2025, 08:05:31 am »
It depends on your country's environmental regulations.
Logged
WhatsApp & WeChat: +85265837594
The following users thanked this post:
2X
Print
Search
Pages: [
1
]
Go Up
« previous
next »
Share me
Smf
EEVblog Electronics Community Forum
»
Electronics
»
FPGA
»
FPGA & CPLD Marking & Part Number - Replacement
There was an error while thanking
Thanking...
EEVblog Main Site
EEVblog on Youtube
EEVblog on Twitter
EEVblog on Facebook
EEVblog on Odysee