Electronics > FPGA

Lattice Diamond Reveal Analyzer cable connection problem

(1/3) > >>

lk.dgironi:
Hello,

I'm having problem connecting to the ispDOWNLOADER in Reveal Analyzer.
Software: Lattice Diamond 64-bit - 3.12.1.454
OS: Windows 10
Programmer: HW-USBN-2A clone

No problem during the program stage.
I can run the Revel Analyzer just once, than I have to disconnect the cable programmer and connect it again.
I end up having two errors.

[16:22:51] @SetCablePort,USB,EzUSB-0,8,0,0,1,1,0,0,0,10
[16:22:51] ERROR: failed to set cable port (cable:USB port:EzUSB-0 error:-5). <a href='file:///C:/lscc/diamond/3.12/docs/manuals/troubleshoot.pdf#FailurePoints'>See Reveal Troubleshooting Guide for more details on Failure Points (2) and (5)[/url]
[16:22:53] @SetCablePort,USB,EzUSB-0,8,0,0,1,1,0,0,0,10
[16:22:53] ERROR: failed to set cable port (cable:USB port:EzUSB-0 error:-1). <a href='file:///C:/lscc/diamond/3.12/docs/manuals/troubleshoot.pdf#FailurePoints'>See Reveal Troubleshooting Guide for more details on Failure Points (2) and (5)[/url].

Find full log attached.

Wondering if anyone has the same problem.
I've found someone here having the same problem https://hifpga.com/%E9%97%AE%E9%A2%98/37542/win10-diamond311%E9%80%9A%E8%BF%87reveal%E6%8A%93%E5%8F%96%E4%BF%A1%E5%8F%B7%E9%97%AE%E9%A2%98/
By Google translator they seems to suggest to download the version 3.10 of Diamond, but I can not find it.
Maybe someone has a copy?

Any help appreciated!

mon2:
Review this link:

http://szfpga.com/mod_bulletin-bulletin_content-bulletin_id-4.html

lk.dgironi:
Made a couple of times, no difference.
I've notice that sometimes it works twice.
I've also try to add a dealy to TCK low pulse. No luck.

mon2:
Open a support ticket with Lattice technical support. Last interaction for us was very  good with their staff in the Philippines. Continue to post your resolution here.

lk.dgironi:
Unluckily mine it's a clone. I suppose they will not service me. I'll try other desktop PC to see if it works there.

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version