Author Topic: LVDS FPGA on carrier  (Read 1469 times)

0 Members and 1 Guest are viewing this topic.

Offline ezalys

  • Frequent Contributor
  • **
  • Posts: 307
  • Country: us
LVDS FPGA on carrier
« on: December 02, 2021, 04:38:01 pm »
Does anyone know of a relatively inexpensive (<$150 USD) FPGA board meant to be socketed into a larger board that has the LVDS pins broken out? The CMODs from Digilent would be ideal if they had diff pair routing and the banks were powered appropriately. I would be happy with any mid-range FPGA — Spartan-7, Artix-7, or ECP5. I want to design a board with a high speed DAC and ADC but would rather avoid the task of doing layout and soldering for such a complex device.
 

Offline asmi

  • Super Contributor
  • ***
  • Posts: 2075
  • Country: ca
Re: LVDS FPGA on carrier
« Reply #1 on: December 02, 2021, 04:49:34 pm »
These are the only ones I know of which I would trust enough to actually put in a product:
https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/TE07XX-Artix-7/
But I would design my own board, as I've done this enough times so it's not a big deal for me. This complexity is overrated, in reality it's rather simple. I'd say laying out say iMX6 boards is more complex than any 7 series FPGA.
« Last Edit: December 02, 2021, 04:56:13 pm by asmi »
 
The following users thanked this post: Miti

Online SiliconWizard

  • Super Contributor
  • ***
  • Posts: 9141
  • Country: fr
Re: LVDS FPGA on carrier
« Reply #2 on: December 02, 2021, 06:08:38 pm »
I second the Trenz boards in that price range.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf