New generateur DDS with Altera cyclone IV.

[Diabolo]

Hello,

Here is the new Feeltech DDS generator equipped with an Altera Cyclone IV clocked with SPXO 50mhz .
The model I bought is 2300H-25 Mhz.
Below the printed circuit there are 1xTHS3001 and 1xMC4558 with radiator fixed with one screw.
What do you think ?





Sorry for my English, I use a translator
Regards,
Alain

[eurofox]

Hello,

Here is the new Feeltech DDS generator equipped with an Altera Cyclone IV clocked with SPXO 50mhz .
The model I bought is 2300H-25 Mhz.
Below the printed circuit there are 1xTHS3001 and 1xMC4558 with radiator fixed with one screw.
What do you think ?





Sorry for my English, I use a translator
Regards,
Alain

Did you make some test to check if there is any improvement?
Vous avez fait des tests pour vérifier s’il y a des améliorations?

[Diabolo]

Hello,
The curves and signals are correct and do not distort.
I have not done great testing, but it's okay and better than other low cost DDS generators tried in the blog.

The blog specialists will do more tests than mine.

I have no connection with the company Felltech company. 

Sorry for my English, I use a translator. 

Regards,
Alain/Diabolo

[Diabolo]

Hello,

Here are some curves with FY2300H
Square 10Mhz
-
Sinus 25 Mhz
-
Triangle 20 Mhz
-
Scie 10Mhz
-


Only everything is not perfect :
Square 20Mhz
-
Scie 20Mhz
-

Regards,
Diabolo