Electronics > FPGA

Which USB Blaster for Altera Max 10 ?

<< < (5/5)


--- Quote from: Scrts on September 25, 2023, 05:32:56 pm ---I had no problems with SignalTap using the adapter for $10.

--- End quote ---
Which one, specifically? What OS and quartus version are you using?

I looked on Amazon for "USB blaster" and found two listings with reviews. First is this one, which looks similar to the amazon link posted above: https://www.amazon.com/NOYITO-Blaster-CPLD-FPGA-Programmer/dp/B07F5H5LPZ/ref=sr_1_4?crid=2Z537F9YE20JQ&keywords=USB+Blaster&qid=1695904031&sprefix=usb+blaster%2Caps%2C89&sr=8-4
About half the reviews say that simply plugging it into a windows 10 machine causes it to BSOD, not good.

The other hit was this, looks similar to the one Martin72 mentioned in reply #6: https://www.amazon.com/waveshare-USB-Blaster-V2-Programmers/dp/B08CV3L6LF/ref=cm_cr_arp_d_product_top?ie=UTF8
Only three reviews, also doesn't sound good...

I've had no problems using the EEBlaster from Entner Electronics with Quartus and Signaltap but this clone is a bit more expensive than the $10 ones from Amazon.

I've used SignalTap with this type https://www.aliexpress.us/item/3256802725721286.html Not this exact seller, since I've bought it ages ago, but this overall design with the white and blue label.

I would assume they are all more or less the same, it is just a dummy FX2LP device and the firmware is loaded by the IDE anyway.


[0] Message Index

[*] Previous page

There was an error while thanking
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod