Author Topic: Draw a 555 chip in Geda ?  (Read 585 times)

0 Members and 1 Guest are viewing this topic.

Offline fixit7

  • Regular Contributor
  • *
  • Posts: 212
  • Country: us
Draw a 555 chip in Geda ?
« on: May 22, 2019, 05:54:44 am »
I have tried several circuit drawing programs, but Geda seems the easiest.

I want to add a 555 chip but can not figure out how.

I tried add a picture of the chip, but the pic was too small.

Any other ideas?
 

Offline golden_labels

  • Regular Contributor
  • *
  • Posts: 82
  • Country: pl
Re: Draw a 555 chip in Geda ?
« Reply #1 on: May 22, 2019, 07:16:51 am »
That should be trivial:
  • Press the “Add component” button;
  • Enter “555” in the filter field;
  • Select the chip;
  • Press “OK” and place the component.
Worth watching: Calling Bullshit — protect your friends and yourself from bullshit!
 
The following users thanked this post: fixit7

Offline fixit7

  • Regular Contributor
  • *
  • Posts: 212
  • Country: us
Re: Draw a 555 chip in Geda ?
« Reply #2 on: May 22, 2019, 12:18:38 pm »
Thanks you very much. :-)
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf