EEVblog Electronics Community Forum

EDA => gEDA => Topic started by: legacy on February 18, 2019, 08:04:17 pm

Title: pcb-rnd, Gentoo overlay (sci-electronics/pcb-rnd)
Post by: legacy on February 18, 2019, 08:04:17 pm
version 2.1.1

Elisabeth and I have just created an ebuild (http://www.downthebunker.xyz/wonderland/chunk_of/stuff/public/projects/gentoo/pcb/pcb-rnd-2.1.1c.ebuild) (rev C), it has been tested on { ppc, hppa }, and it requires these (http://www.downthebunker.xyz/wonderland/chunk_of/stuff/public/projects/gentoo/pcb/files) two patches

besides, it requires these use flags, in /etc/portage/package.use/eda
Code: [Select]
sci-electronics/gerbv     doc examples -static-libs unit-mm
sci-electronics/pcb-rnd   -cairo gtk motif -opengl xrender gcode gerber

The installed programs will come with two GUIs: gtk and openmotif!
If you want opengl hardware support, you need to enable the opengl flag.

edit:
We (at DTB) are not affiliated with Gentoo, but we are unofficial supporters for non-x86 machines.
Title: Re: pcb-rnd, Gentoo overlay
Post by: legacy on February 18, 2019, 08:30:18 pm
We will try to support future versions of pcb-rnd as soon as released.
Title: Re: pcb-rnd, Gentoo overlay
Post by: ScribblesOnNapkins on February 19, 2019, 05:31:06 am
Wow. Thank you for doing this!

Thanks also from our project leader Igor2.
Title: Re: pcb-rnd, Gentoo overlay (sci-electronics/pcb-rnd)
Post by: legacy on February 19, 2019, 05:16:05 pm
we have just enhanced a bit the ebuild (http://www.downthebunker.xyz/wonderland/chunk_of/stuff/public/projects/gentoo/pcb/pcb-rnd-2.1.1e.ebuild) (rev E) and added a userflag (http://www.downthebunker.xyz/wonderland/chunk_of/stuff/public/projects/gentoo/pcb/pcb-rnd-2.1.1-useflags.txt) table.