Hello,
here is the next step... Version 1.9.0.0
https://drive.google.com/file/d/1aLDYWCpmBErAR73hmy5tdUJK8k3bo69K/view?usp=sharingBig things:
CameraCommanderFLIRit was previously called "EX-Tools" and was a separate application made for the enhanced FLIR E4, but also works for many other FLIR Cameras. Now its renamed and a dockable subwindow.
There is also an FTP Tab to be able to explore and download files from the camera. The FTP is not that beautiful and features rich like FileZilla, but it works with older instructions, therefore it can read files from an old Thermacam E45 (or E4). I will open a separate thread for that later.
I also combined the "Device: FLIR Ex" and "Function:Flir IR image Grabber" to a "Device: Flir" with shared connection and cal settings.
language folder instead of one fileit was necessary because there was to much content. Now there is one folder for each language and there is one file for each (sub)window. this should also help to maintain the software better without changes on older windows.
the language label has now a mouse menu to make a change easier. i hope all translations match, improvements are welcome.
Testo .bmt files are supported now. I know 2 types of Thermal frames and 2 Types of visual images (PNG and JPG frames). the provided sample images from there Software will work and from a Testo 880-1 too.
2 Notes... Testo store the Thermal frame as float temperature array, therefore the temperatures were read, not calculated like images from a flir. And images with SuperResolutions was just an array of single frames. Testo calculates the SR Image on opening in their software, therefore i only read in native resolution.
other stuff:
- Seek Reveal Pro tiff frames can be read... a poor implementation now... i only grab the frame which is remapped with given min and max values or with a 2 point calibration with slope and offset. sadly i know not enough about the format, and seek seems to tell nothing about...
- 3x3 Kernel for point measurements are default active now
- Settings file can be accessed directly, and "Save on close" can be disabled for current running instance
- fast refresh option (mouse menu) will now actualize the measured Data in the Meas grid
(need to be disabled if the performance degenerates on smaller pc's)
- a parameter to reload the last settings of the window (-WINSIZE, this was previously standard, but make problems in some cases, therefore optional)
- a parameter to start in Camera mode (-CAM)
- round Data for the Values in a Report
- report: tables have now a header
- process visual image setup can be saved and loaded now. Additional: stored setups can be executed directly from mouse menu from visual window.
- sometimes "disable measurement" don't work, this is now fixed
- Visual: "Lock IR-Ratio" will now also work for numeric direct changes
- changes for DIY-Thermocam initialization (i hope it work's now for all)
- initialize an empty 160x120 frame to be able to use -FS and -CAM command without an image
- disable WebcamA on opening VisualProcessing window (don't need a new Frame if you want to change the current)
- Visual relief has now an invert option (don't need to invert the numeric factor for single relief manually)
- Visual relief is more stable (no more Memory overflow in some settings)
- 2x new Slots for the palette generator:
(need to be placed in TVisionData\ and have to be called "Slot1.ppg" and "Slot2.ppg")
https://www.eevblog.com/forum/thermal-imaging/palette-generator-free-tool-to-create-thermal-palettes-for-flir-tools/msg1440174/#msg1440174Additional i have only Win7 here and build for win10 and windows UWP are only for Win10 users. Running on a tiny stick sounds really interesting for cameras...
good night
joe-c