Example Project: EEVblog uCurrent

[voltsandjolts]

Dave's uCurrent Rev5 board translated to Circuit Studio format.

The zipped PCB file alone was over the 1MB forum attachment limit so I used 7zip (free open source) to compress and split the project to two files.

To unzip the project:
1/ Download both the attached files
2/ Remove the ".hex" file extension to leave the extensions as ".001" and ".002" (workaround for forum file extension rules)
3/ Get 7zip http://www.7-zip.org/download.html
4/ Open "uCurrentRev5-CStudio.7z.001" with 7zip