Author Topic: Inrush Current Limiter (Soft Starter) for AC and DC Loads  (Read 773 times)

0 Members and 1 Guest are viewing this topic.

Offline hesam.moshiriTopic starter

  • Regular Contributor
  • *
  • Posts: 139
  • Country: se
    • MyVanitar
Inrush Current Limiter (Soft Starter) for AC and DC Loads
« on: June 09, 2020, 06:04:36 am »
Inrush current/Switch-ON surge is the maximal instantaneous input current drawn by an electrical device when first turned on. Inrush current is much higher than the load’s steady-state current and that’s the source of many problems such as fuse blowing up, load failure, load’s lifetime reduction, sparks at the switch contacts … etc. I tried to address this problem with an easy, however effective solution. I have introduced two circuits for both AC and DC loads.

« Last Edit: June 09, 2020, 08:48:12 am by hesam.moshiri »
 
The following users thanked this post: thm_w


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf