RTB2000 course here in the forum that can help me get started?

[Frank_MV]

Hello to all oscilloscope experts here on the forum,

I recently got an RTB2004, is there some sort of course here in the forum that can help me get started?
I am particularly interested in recording single operations with the "Single" button (as example spikes when turning a rotary switch) and recording I2C logs and displaying them from memory.

So far I have used my analog HAMEG HM 303

Thanks in advance,
greetings,
Frank

[Omicron]

R&S makes nice user manuals:

https://www.rohde-schwarz.com/cz/manual/r-s-rtb2000-user-manual-manuals-gb1_78701-402707.html

[Frank_MV]

thanks, but of course I already have the user manual :-)
But unfortunately it does not contain any concrete measurement examples.
For someone who has years of experience with other digital oscilloscopes, it may be good as a reference book, but for beginners less ;-)

[Frank_MV]

Nobody here knows that ?

[tubularnut]

Check out the videos at R&S

Example below.

https://www.rohde-schwarz.com/uk/knowledge-center/videos/r-s-rtb2000-waveform-and-pattern-generator-video-detailpage_251220-505224.html

[cmumford]

If you have the History option then I recommend viewing "Segmented / History mode on R&S RTB2004 vs. Keysight MSOX1000". IMO this is a must when capturing I2C dialogs between devices.

[Rich@RohdeScopesUSA]

Hi Frank_MV - we also have some short YouTube "how-to" videos on the RTB2000 here:

https://www.youtube.com/playlist?list=PLKxVoO5jUTlsHhyVcpVaZJ-a1x6mK9Fj9

-Rich

[Frank_MV]

Thanks for all your tips.

Br,
Frank