Hi Bud thank you! The USB mode through FLIR tools is still not working. It now shows a splash screen recognizing the E4 but when i click to import from the E4, it still shows sources not found. Also connect to live stream doesnt work and is grayed out.
ThermaCAM connect 3 still showing same error.
I have however downloaded the image through FTP and then load them into FLIR tools, which showed IR resolution to be 320x240 under image information.
Do you think I need to load the "Remove_RNDIS_Permament.fif" in order for USB mode to work?
And yes I'd love to have all the extra unlocked! currently the options showing on device are:
image mode: alignment distance, thermal MSX, Thermal, picture in picture, thermal blending and digital camera
measurement: center spot, hot spot, cold spot and no measurement
color: iron, rainbow, gray, below alarm and above alarm
temp scale: auto, manual
edit: FLIRInstallNet shows Local Area Connection 2 - 192.168.0.2 instead of FLIR E4
check installation failed, "CRC Appkit failed"
get Versions:
product indentification: QX
SW combination: 2.3.0
Appkit 2.1.2
Bootloader 16.1.5.0
Confkit E4 1.1L
OSImgkit 18.1.20
ProdKit: 0
edit 2:
got into the hidden menu from camera information, USB mode is RNDIS, tried to select MSD, UVC, and RDNIS+MSD, non worked, once I click middle button it goes back to the hidden menu home, USB mode is still stuck on RNDIS