EEVblog Electronics Community Forum

Electronics => PCB/EDA/CAD => KiCad => Topic started by: Sefanoulis7 on March 27, 2022, 02:24:14 pm

Title: (Kicad) pcb design for water level sensor xkc y25
Post by: Sefanoulis7 on March 27, 2022, 02:24:14 pm

When the sensor is in water, the led is on and it works with 12 v dc. I will use 12 sensors in the design of the card, and when the sensor does not see water, the led I used on the card will turn on and the relay and buzzer will work even if any of them are lit. I don’t have much experience for design. Can you help me with this?

Title: Re: (Kicad) pcb design for water level sensor xkc y25
Post by: Doctorandus_P on March 28, 2022, 05:09:38 pm

https://forum.kicad.info/t/pcb-design-for-water-level-sensor-xkc-y25/34908

Title: Re: (Kicad) pcb design for water level sensor xkc y25
Post by: simon mugo on April 12, 2022, 01:16:15 am

this requires you to design a schematic that describes your idea. We have so many commercially available water level detectors and I could advise you buy one of them and have a look at its features, manuals, and operation then try implementing one. Thanks