KiCad
Topics
[1] Can't route traces or pour copper to connect MP8765 IC
[4] Cutting filled zone into smaller ones in KiCad's PCB layout editor?
[5] Unable to set via diameter larger than hole size in Kicad 8.0.5
[6] 8.0.5 broke the intersheet references...
[7] How to best annotate components that are on the chassis and not on the PCB
[8] Kicad 8 on windows 10 opengpl problem
[9] Via annular too small (0.125 vs 0.13 limit)
Navigation
[0] Up one level
[#] Next page
Go to full version