Author Topic: Exported SVG in Illustrator  (Read 3292 times)

0 Members and 1 Guest are viewing this topic.

Offline Watth

  • Regular Contributor
  • *
  • Posts: 99
  • Country: fr
  • Country: fr
Exported SVG in Illustrator
« on: August 10, 2016, 06:46:28 pm »
Ohai,
I have an issue with SVG files exported by KiCAD. I edit them in Adobe Illustrator (to add text, for exemple).
The problem is that every stroke are ridiculously thicker than they should be. For exemple theu weight 33.33 mm instead of 0.24mm.
Has anyone seen the same issue? Any one knows a solution?
Illustrator is the CC version, up to date.
Because "Matth" was already taken.
 

Offline PCB.Wiz

  • Frequent Contributor
  • **
  • Posts: 356
  • Country: au
  • Country: au
Re: Exported SVG in Illustrator
« Reply #1 on: August 12, 2016, 10:58:57 pm »
This is SCH ?

I see SVG and DXF export as simply polylines, so you could also try PDF into Illustrator.

PDF seems to export with Text and a polyline combination (text invisible, but searchable)
 

Offline Watth

  • Regular Contributor
  • *
  • Posts: 99
  • Country: fr
  • Country: fr
Re: Exported SVG in Illustrator
« Reply #2 on: August 13, 2016, 08:15:38 pm »
No, I want to export from PCBNew, to print on transparent for photo+chemical PCB making.
Printing to PDF is not great, since I paths are not connected, and selecting each one of the same kind is too arduous.
Because "Matth" was already taken.
 

Offline PCB.Wiz

  • Frequent Contributor
  • **
  • Posts: 356
  • Country: au
  • Country: au
Re: Exported SVG in Illustrator
« Reply #3 on: August 14, 2016, 11:14:05 pm »
No, I want to export from PCBNew, to print on transparent for photo+chemical PCB making.

PcbNew -> SVG looks perfectly fine to me, viewing in a Chrome Browser ?
Text plots as vectors, in the expected line-width, and pads render with holes == Drill Size.
( For larger pads, a drill dot could be nice to have...)
 

Offline Watth

  • Regular Contributor
  • *
  • Posts: 99
  • Country: fr
  • Country: fr
Re: Exported SVG in Illustrator
« Reply #4 on: August 15, 2016, 12:49:26 pm »
Yes, it appears OK in InkScape... It's weird that Illustrator makes such a mess...
Because "Matth" was already taken.
 

Offline PCB.Wiz

  • Frequent Contributor
  • **
  • Posts: 356
  • Country: au
  • Country: au
Re: Exported SVG in Illustrator
« Reply #5 on: August 17, 2016, 02:55:45 am »
Yes, it appears OK in InkScape... It's weird that Illustrator makes such a mess...
A cynic might say that is a deliberate Turf Protection Ploy by Adobe, for any file format that is not their own, to be crippled in some way ...
Do you have to use Illustrator ?
 

Offline technotronix

  • Regular Contributor
  • *
  • Posts: 211
  • Country: us
  • Country: us
    • PCB Assembly
Re: Exported SVG in Illustrator
« Reply #6 on: August 17, 2016, 04:16:07 am »
Did you tried Library editor? Even in PCbNew, you can export the complete board as SVG or from the file menu.
 

Offline Watth

  • Regular Contributor
  • *
  • Posts: 99
  • Country: fr
  • Country: fr
Re: Exported SVG in Illustrator
« Reply #7 on: August 17, 2016, 12:27:37 pm »
Yes, it appears OK in InkScape... It's weird that Illustrator makes such a mess...
A cynic might say that is a deliberate Turf Protection Ploy by Adobe, for any file format that is not their own, to be crippled in some way ...
Do you have to use Illustrator ?

Appart from the SVGs from pcbnew, I usually don't have problems to open this format.
I'm more used to Illustrator, now. And there are some features that InkScape doesn't have. (And I pay for Adobe CC, FFS! I might as well use it!)

Did you tried Library editor? Even in PCbNew, you can export the complete board as SVG or from the file menu.
That's what I do :
Ohai,
I have an issue with SVG files exported by KiCAD. I edit them in Adobe Illustrator (to add text, for exemple).
The problem is that every stroke are ridiculously thicker than they should be. For exemple theu weight 33.33 mm instead of 0.24mm.
Has anyone seen the same issue? Any one knows a solution?
Illustrator is the CC version, up to date.
Because "Matth" was already taken.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf