EEVblog Electronics Community Forum
Electronics => PCB/EDA/CAD => KiCad => Topic started by: HoracioDos on November 23, 2017, 02:09:51 pm
-
Hello!
I'm looking for a Fender 5 way switch symbol. Acording to this article it’s a 2-pole 3-way switch.
http://alloutput.com/guitar/5-way-switches-explained/ (http://alloutput.com/guitar/5-way-switches-explained/)
Does anybody know where can I find a switch library for this one?
Thanks in advance!
-
Why don't you make your own?
The schematic symbol wouldn't take more than a pair of minutes.
For the footprint you NEED to now the actual switch you will use.
-
Why don't you make your own?
I built this switch according to the article. Is it correct to have pins with duplicate names?
-
Same name is fine, in this case they should not be the same pin number, aka the same net.So, you would have pin 1 through 8, and indicate their association by name.
Looks good to me :)