EEVblog Electronics Community Forum

Electronics => PCB/EDA/CAD => KiCad => Topic started by: opampsmoker on October 23, 2020, 11:17:46 am

Title: How to start a 0.3mm thick silkscreen line in KiCAD?
Post by: opampsmoker on October 23, 2020, 11:17:46 am

Hi,
In KiCAD footprint editor......
Do you know how to set the line thickness of a silkscreen line to 0.3mm before its drawn?
(So that i draw it as a 0.3mm think line in the first place)

Title: Re: How to start a 0.3mm thick silkscreen line in KiCAD?
Post by: phil from seattle on October 28, 2020, 09:48:07 pm

In 5.1.6 Pcbnew, open Board Setup/Text and Graphics. Set Silk Layers/Line Thickness.