Author Topic: Imported kicad symbol for IRF9Z24SPBF but can't associate it with the footprint  (Read 5671 times)

0 Members and 1 Guest are viewing this topic.

Offline komradebobTopic starter

  • Newbie
  • Posts: 9
  • Country: us


Pardon the noobness of the question, but after many many years with <alternate PCB design program> I'm switching over to kicad and some of it's ways are baffling me.

I've managed to d/l and import the kicad library for the Vishay IRF9Z24SPBF symbol and imported the library for the 'pretty' footprints, but somehow the symbol is not associated with the footprint and darned if I can find even the vocabulary for how to associate a footprint in the library with a symbol in the library. Could someone possibly point me in the right direction?

Many thanks from a frustrated, grumpy old engineer...

 

Offline Doctorandus_P

  • Super Contributor
  • ***
  • Posts: 3835
  • Country: nl
Symbol Editor / File / Symbol Properties / General (Tab) / Footprint
 
The following users thanked this post: komradebob


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf