Electronics > KiCad

KiCAD issue - Cannot make changes to a single gate in a multi-gate component.

(1/2) > >>

Alex:
Hi all, I am making a library in KiCad. The component needs to have two gates.

I create a new component and assign two parts to it in the preferences. Part A and part B selection becomes available.
I draw up part A but when I select and make changes to Part B these changes are also applied to part A. I have made other libraries in the past, anyone heard of this issue?

djsb:
Are you using the latest stable version or a testing version off the launchpad site (see my other post about compiling KiCAD for Windows)? If there is an issue you can check on Launchpad (https://bugs.launchpad.net/kicad) or have a look at the Yahoo kicad-users group (http://tech.groups.yahoo.com/group/kicad-users/). I havent tried what your doing, so I can't confirm this issue myself.

David.

Alex:
Thanks for the reply David. I was not able to find any reported bugs on that link. I downloaded it from here:
http://www.lis.inpg.fr/realise_au_lis/kicad/

I am really not the type of user that will compile his CAD package in order to use it and eliminate bugs. :)
Are you aware of a place that hosts the latest compiled version?

I will also post on the kicad yahoo group I am part of.

amspire:

--- Quote from: Alex on December 08, 2011, 11:45:29 pm ---Are you aware of a place that hosts the latest compiled version?

--- End quote ---

There is always this forum.  :)

I have been posting recent builds occasionally. I will compile the latest. I haven't done a new version recently, but I will put build 3825 3285 up later today, if it looks OK. (Some of the testing build have had new bugs, so I haven't been posting all of the newly compiled versions I have built).

Richard

Alex:
Do you mean build 3285 amspire?

Thanks, at least I can rule out that there isn't a problem with the installed version.

Navigation

[0] Message Index

[#] Next page