@FreeThinker: I don't really need any more boards, they made 12 and I only need 1 for the proto.
@Kiriakos-GR: I don't know what you are talking about, do you? The layout is a 10/10, except for the MCU which is 0.5mm. The via hole size is 24mil. There's nothing squeezed about this and it is not a mess. The minimum annular ring is 12mil and, having made thousands of other PCB's with these same footprints over decades, find this to be adequate. It's not a hobby-magazine board for beginner solderers who would probably butcher something like this.
Have examined the 12 board received. Only 3 have defects, includingthe one I fitted, which was selected at random after examining another board as a reference. The defects are also random. Murphy's Law of course, since the one I grabbed for fitting is the worst of them all!