Author Topic: Can anyone in the UK solder some VSSOP-10 chips onto adapter boards?  (Read 1233 times)

0 Members and 1 Guest are viewing this topic.

Offline Robert Smith Eco WarriorTopic starter

  • Regular Contributor
  • *
  • Posts: 120
  • Country: gb
Hi All,
My son and I are doing a project using some very small INA238 components. I think the 0.5mm leg spacing will possibly be beyond my hand soldering capability and I might possibly cook the device for too long while encasing all ten legs in one blob of solder.
I have ordered the little chips and also some little adapter boards to bring the size upto 'normal' DIP size package.

Can anyone in the UK help with soldering those together?
 

Online artag

  • Super Contributor
  • ***
  • Posts: 1059
  • Country: gb
Re: Can anyone in the UK solder some VSSOP-10 chips onto adapter boards?
« Reply #1 on: April 14, 2021, 04:09:57 pm »
I've soldered 0.5mm before, but I'm probably not the best at it. Would probably help if you say whereabouts in the UK you are.

You could try a local phone repair shop - if they do their own repairs they'll generally have the equipment and skill to do it.

Alternatively, try a hackspace - most of them are reopening this week. At the London one we have an infra-red reflow oven that can be used (though ideally you'd want a stencil to apply solder paste).

 

Offline jc101

  • Frequent Contributor
  • **
  • Posts: 612
  • Country: gb
Re: Can anyone in the UK solder some VSSOP-10 chips onto adapter boards?
« Reply #2 on: April 14, 2021, 05:32:18 pm »
They don't look too bad, providing the adapter boards have sufficient exposed pad to solder them.  I could probably do them under the microscope.

 

Online artag

  • Super Contributor
  • ***
  • Posts: 1059
  • Country: gb
 

Offline alanambrose

  • Frequent Contributor
  • **
  • Posts: 377
  • Country: gb
Re: Can anyone in the UK solder some VSSOP-10 chips onto adapter boards?
« Reply #4 on: April 21, 2021, 05:06:28 pm »
Hi,

It's actually pretty easy to do this yourself using some magnification. Also very easy to fix if you short some legs together. A long time ago I did find someone in Scotland who did this as a service and there's also some custom PCBs with stencils for this purpose if you look - from a Canadian company if memory serves.

The Scotish co was:

https://tirnaelectronics.co.uk/

- I can't see they offer that service now, but maybe if you ask...

The Canadian co is:

http://www.proto-advantage.com/

(not bad searching-fu considering it was 10 years ago)

Roth and a million eBay sellers also sell adapter boards you can solder yourself.

Look for 'SMD to DIP adaptor kit' or something similar.

Alan
“A foolish consistency is the hobgoblin of little minds"
 

Offline disillusionedrealist

  • Newbie
  • Posts: 2
  • Country: gb
Re: Can anyone in the UK solder some VSSOP-10 chips onto adapter boards?
« Reply #5 on: April 21, 2021, 07:36:48 pm »
I could do these no problem if you decide not to. No charge other than postage.

 

Offline Robert Smith Eco WarriorTopic starter

  • Regular Contributor
  • *
  • Posts: 120
  • Country: gb
Hi All,
Thanks for the replies.
I lost track of this thread but just found the 'Show new replies to your posts' button  :-+
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf