Electronics > Manufacturing & Assembly

From Schematic to PCB

(1/5) > >>

dellsam34:
I have the attached schematic for an old school motor control and I want to make it on a PCB for ordering, My question is how much it would cost to have a PCB design file ready for ordering? I haven't order the electronic components yet, just looking for some advice, I've included links to some components.
The original board is part of a big system control board, I've isolated the section that controls the motor which what I need and I want to make a small PCB for it, I already have the transformer TR. and the motor SCM-200.

List of electronic components:

Resistors:
- R1 4.7KΩ
- R2 1KΩ
- R4 220Ω
- R5 2.7KΩ
- R6, R7,R10, R13, R24, R25 10KΩ
- R8, R22 1.5KΩ
- R2, R11, R23, R26, R27 1KΩ
- R9, R12 100KΩ
- R14, R19, R21, R32 3.3KΩ
- R15 39KΩ
- R17, R18 22KΩ
- R28 330Ω
- R29 180Ω
- R30 100Ω
- R31 56KΩ

Capacitors:
- C1 Elect. cap. vertical 2200uF/35WV -> https://www.ebay.com/itm/184481088505?hash=item2af3ee03f9:g:6ywAAOSwgiZfgBdw
- C2 220/35 -> https://www.ebay.com/itm/173287185970?hash=item2858b89e32:g:jTYAAOSwhvFZJk3e
- C3 22/25 -> https://www.ebay.com/itm/143803710809?hash=item217b5e7d59:g:Qw4AAOSwzcdfk8MN
- C4 Elect. Cap.vertical 1000uF/25WV -> https://www.ebay.com/itm/390977634935?hash=item5b08154277:g:L3oAAOSwKrxUagNX
- C8 100/16 -> https://www.ebay.com/itm/173243800293?hash=item2856229ae5:g:bT0AAOSwKfVXFkh2
- C9 0.12(K) -||-
- C10 0.01(K) -||-
- C11 10/15 -> https://www.ebay.com/itm/173373908900?hash=item285de3e7a4:g:uy8AAOSwIgNXqvjt
- C12, C15 1/25
- C13 0.0033(K) -||-
- C14 0.033(K) -||-
- C16 0.33/50(K)
- C17 10/16
- C18 1/100
- C20 Metallized film cap. vertical 3.5uF(K)/180WV
- C56 22/25

Diodes:
- D1 Silicon Bridge Diode SVB10-100 -> https://www.ebay.com/itm/200915990145?hash=item2ec786b681:g:zPEAAOxyn9BRbCjW
- D2 Zener Diode HZ22-3 -> https://www.ebay.com/itm/294044174113?hash=item4476660721:g:jrYAAOSwXYtY2Wax
- D6 Zener Diode WZ-120 -> https://www.ebay.com/itm/264359189910?hash=item3d8d091d96:g:wlgAAOSwTKBamBUf
- D7, D8 Silicon Diode 1S2473 VE -> https://www.ebay.com/itm/254599068844?hash=item3b47497cac:g:IVoAAOSw4f5YCHwl
- D9 Silicon Bridge Diode SVB10-200 -> https://www.ebay.com/itm/192835621634?hash=item2ce5e61302:g:8UwAAOSwo3xccHRF

Transistors:
- TR1 2SC1061 (B)(C) YC-408 -> https://www.ebay.com/itm/324030185415
- TR2, TR4, TR5, TR6, TR7, TR8 and TR11 2SC945L (Q)(P) -> https://www.ebay.com/itm/265163866373
- TR9, TR10, TR12 2SA733 (P)(Q) -> https://www.ebay.com/itm/324519219622?var=513577327133
- TR13 2SC2336B (Q)(P) -> https://www.ebay.com/itm/281038917605

Variable Resistors:
- VR1 Semi-fixed / Vol. V18K3-6 (4US) 50KB -> https://www.ebay.com/itm/124719229345?hash=item1d09d869a1:g:0QoAAOSwXq5ZqRgt

jpanhalt:
Given just what you have posted, you will need engineering help to decide which components to use.  For example, for a simple resistor of a given value, there are hundreds of choices.  Once all the components are properly defined, then you need to define the type of pcb, e.g., approximate size and number of layers.  Do you want the old transistors to be soldered or socketed?  Can you find all the parts?


Just a guess from my own experience, but once everything is defined, I would expect about 3 days (24 hours) to get a first draft.  After that, maybe a day or two for revisions.  I don't have a clue what such services cost per hour, but I suspect you are talking thousands, not hundreds of dollars.  Remember, that does not include engineering costs.

I suggest downloading a free version of some common software and learning to do it yourself.  If your purpose to to get a motor speed control and not to duplicate a vintage design, it will be much easier to start with modern chips and designs.

dellsam34:
This is just for one single board, definitely not for production or that budget scale. I can get all the components and I know what to get, The PCB is a single layer with old fashion soldering method, no surface mounted components, I know I can get it made for less than $50. The part I'm inquiring about is the schematic to Gerber phase.
I've edited my original message to include some links to components, Please advise if wrong component chosen.

Bassman59:

--- Quote from: dellsam34 on May 18, 2021, 01:03:30 pm ---This is just for one single board, definitely not for production or that budget scale. I can get all the components and I know what to get, The PCB is a single layer with old fashion soldering method, no surface mounted components, I know I can get it made for less than $50. The part I'm inquiring about is the schematic to Gerber phase.

--- End quote ---

That is called "PCB layout" and is a significant task. If you don't know how to do this, you can contract it out, but don't expect anyone to do it for free because it's actual work.

dellsam34:
Thanks, No I'm not expecting free service, I'm just looking for tips and advice. Worst come to worst I can lay down the components the way they are on the schematic and just run the copper traces as shown in the schematic.

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version