I can't seem to get a straight answer from JLCPCB as to whether they can successfully produce this PCB form me.
The project is the Pimeta2 headphone amp. And the Eagle files are all in a ZIP file, here:
https://tangentsoft.net/audio/pimeta2/dfiles.htmlI can import this ZIP file into JLCPCB. And the various Gerber Views
look okay.
However, below are my Analysis Results.
BOTTOM LINE: Am I going get a working PCB from JLCPCB. (I have dealt with them before, with a much simpler project. It had some Analysis issues, too. I created a thread here on EEVBlog about it in 2020. I did get a successful product from JLCPCB.)
Analysis Results
layers : -1
minimum trace width : >=10 mil
minimum trace spacing : >=10 mil
minimum drill size : null
width : null
height : null
Unable to identify the layers due to the non-standard filename
Can not identify the board outline
pimeta-v2.brd(null): Non-gerber274X/excellon formats
pimeta-v2.cam(null): Non-gerber274X/excellon formats
pimeta-v2.cmp(null):Unrecognized Gerber file
pimeta-v2.drd(null):Unrecognized Gerber file
pimeta-v2.dri(null): Non-gerber274X/excellon formats
pimeta-v2.ic1(null):Unrecognized Gerber file
pimeta-v2.ic2(null):Unrecognized Gerber file
pimeta-v2.plc(null):Unrecognized Gerber file
pimeta-v2.pls(null):Unrecognized Gerber file
pimeta-v2.sch(null): Non-gerber274X/excellon formats
pimeta-v2.stc(null):Unrecognized Gerber file
pimeta-v2.sol(null):Generic Gerber file
pimeta-v2.sts(null):Generic Gerber file