Author Topic: LED blowing off  (Read 952 times)

0 Members and 1 Guest are viewing this topic.

Offline Munyua44

  • Contributor
  • !
  • Posts: 19
  • Country: ke
LED blowing off
« on: January 17, 2022, 11:09:18 am »
My LED on the board keeps blowing off. what might be the error?
 

Online kylehunter

  • Regular Contributor
  • *
  • Posts: 104
  • Country: us
Re: LED blowing off
« Reply #1 on: January 17, 2022, 03:54:14 pm »
We'll need much more info. First thing to check, is to make sure you're not breathing or blowing on it. That certainly could cause a part to move.
 

Offline DLE

  • Newbie
  • Posts: 3
  • Country: us
Re: LED blowing off
« Reply #2 on: January 17, 2022, 07:47:37 pm »
Could be a few things.  Not enough paste for the part to stick to, PNP not pressing the LED into the paste, blow setting on PNP during place is too high, place delay too short, place height too high and PNP is dropping the part.  Hard to say with limited info but those are the first things that come to mind.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf