Author Topic: Mounting bracket for rounded alu-extrusion-enclosure  (Read 142 times)

0 Members and 1 Guest are viewing this topic.

Offline Martin F

  • Regular Contributor
  • *
  • Posts: 128
  • Country: dk
Mounting bracket for rounded alu-extrusion-enclosure
« on: September 19, 2019, 12:02:04 pm »
Hi all,

We're selling a device with an extruded enclosure similar to this model:
http://www.everestcase.com/en/productsdetail.asp?pid=1925

For this device, we're looking to develop/source a mounting bracket that could be installed in e.g. a wall, metal plate or similar.
The idea would be to have our enclosure be "clicked into" the mounting bracket and optionally locked in via strips. We're thinking that the rounded shape of the enclosure could facilitate such a setup.

I've attached a sketch of the idea here:
https://docs.google.com/presentation/d/1WNLvmr27Pbdbj_wmYbMJ6Locu1I-Defsg002yGKMavM/edit?usp=sharing

Our challenge is that we've looked for a long time - but we've not been able to find anything that matches our needs in this regard.
Has anybody seen a similar construction as to what we're looking for? We could embark on designing it ourselves, but we'd rather see if something similar already exists.

Thanks,
Martin
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf