Electronics > Manufacturing & Assembly

Neoden 4 pick and place

(1/306) > >>

Spikee:
Has anyone used or even have the new neoden4 pick and place machine?
http://www.neodentech.eu/contents/en-uk/d8_NEODEN4.html

Looks like a reasonable pick and place for the 7.5K. But bad software can make it a expensive paperweight.

I have the liteplacer pick and place and it actually works quite good but no feeders is becoming a problem.

TheSteve:
I will get a chance to use one within a few weeks and will report back with how well it works(or doesn't!).

Spikee:
Neoden has sent met the training videos. That software release looks quite basic and not as refined as you would expect from a 10k device.
Would be best if it was open source but I do not think that will happen.

While the vision operators are a bit better than the ones on the liteplacer. The UI of the liteplacer is better so is the assigment from csv to pnp feeder is better.

TheSteve:
I expect to be there when one is unpacked on Friday.

jc101:
 :popcorn:

Be interested to see what people discover...

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version