Author Topic: Alternative to CNC milled PCBs  (Read 988 times)

0 Members and 1 Guest are viewing this topic.

Offline kelvneTopic starter

  • Newbie
  • Posts: 3
  • Country: br
  • they hate DIYsts here
Alternative to CNC milled PCBs
« on: June 07, 2023, 05:48:30 pm »
 trying to delete my account
« Last Edit: June 08, 2023, 11:18:36 pm by kelvne »
 

Offline thm_w

  • Super Contributor
  • ***
  • Posts: 6328
  • Country: ca
  • Non-expert
Profile -> Modify profile -> Look and Layout ->  Don't show users' signatures
 

Offline mairo

  • Supporter
  • ****
  • Posts: 218
  • Country: au
Re: Alternative to CNC milled PCBs
« Reply #2 on: June 08, 2023, 12:16:57 am »
For via plating, you can check what LPKF are offering. They have 'benchtop' machines for that, which can be found for cheap in ebay (older models, but does same job). You can look at theirs manual to see how they do it - seems not too hard, just dipping in different solutions for various time and temperatures (their machines use normal aquarium heaters).

https://www.lpkf.com/en/industries-technologies/research-in-house-pcb-prototyping/products/lpkf-contac-s4
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf