Author Topic: Some China PCB manufacturer recommend  (Read 66517 times)

0 Members and 1 Guest are viewing this topic.

Offline elektronchika

  • Contributor
  • Posts: 42
  • Country: bg
    • Elektronchika's blog
Re: Some China PCB manufacturer recommend
« Reply #100 on: March 20, 2019, 03:52:10 pm »
Hi everybody,

can you recommend me a pcb manufacturer that can do 6 layers board, without any requirements for impedance and special stack-up, standard width and spacing. All that I checked (also with pcb shopper) start from $200. I need only 2 boards, but not 5 or 10.

Thanks,
Lazar
 

Online NorthGuy

  • Super Contributor
  • ***
  • Posts: 3246
  • Country: ca
Re: Some China PCB manufacturer recommend
« Reply #101 on: May 24, 2019, 07:48:06 pm »
Hi everybody,

can you recommend me a pcb manufacturer that can do 6 layers board, without any requirements for impedance and special stack-up, standard width and spacing. All that I checked (also with pcb shopper) start from $200. I need only 2 boards, but not 5 or 10.

Try http://www.wellpcb.com
 

Offline mrpackethead

  • Super Contributor
  • ***
  • Posts: 2845
  • Country: nz
  • D Size Cell
Re: Some China PCB manufacturer recommend
« Reply #102 on: May 25, 2019, 12:17:15 am »
On a quest to find increasingly complicated ways to blink things
 

Offline andwinpcb

  • Newbie
  • Posts: 2
  • Country: cn
Re: Some China PCB manufacturer recommend
« Reply #103 on: May 27, 2019, 10:12:32 am »
here is about direct to copper technology
https://www.andwinmcpcb.com/thermal-pad-mcpcb/
 

Offline andwinpcb

  • Newbie
  • Posts: 2
  • Country: cn
Re: Some China PCB manufacturer recommend
« Reply #104 on: May 27, 2019, 10:14:19 am »
Hi everybody,

can you recommend me a pcb manufacturer that can do 6 layers board, without any requirements for impedance and special stack-up, standard width and spacing. All that I checked (also with pcb shopper) start from $200. I need only 2 boards, but not 5 or 10.

Thanks,
Lazar
https://www.andwinpcb.com
 

Offline Kean

  • Supporter
  • ****
  • Posts: 2233
  • Country: au
  • Embedded systems & IT consultant
    • Kean Electronics
 
The following users thanked this post: mrpackethead, blueskull

Offline ddavidebor

  • Super Contributor
  • ***
  • Posts: 1190
  • Country: gb
    • Smartbox AT
Re: Some China PCB manufacturer recommend
« Reply #106 on: July 15, 2019, 08:50:41 pm »
Hi everybody,

can you recommend me a pcb manufacturer that can do 6 layers board, without any requirements for impedance and special stack-up, standard width and spacing. All that I checked (also with pcb shopper) start from $200. I need only 2 boards, but not 5 or 10.

Thanks,
Lazar

Check PCBway. Don't expect it to be much under 200USD tought, 6 layer pcb have quite a complicated setup already.

David
David - Professional Engineer - Medical Devices and Tablet Computers at Smartbox AT
Side businesses: Altium Industry Expert writer, http://fermium.ltd.uk (Scientific Equiment), http://chinesecleavers.co.uk (Cutlery),
 

Offline Bob Moore

  • Newbie
  • Posts: 8
  • Country: tw
    • TITOMA
Re: Some China PCB manufacturer recommend
« Reply #107 on: September 23, 2019, 06:57:35 am »
thanks for building this great tool Bob!
I think you have enough suppliers as is, I would just display the number of reviews next to the star rating for each supplier.

cheers,

another Bob.

Best,
Bob Moore
 

Offline rea5245

  • Frequent Contributor
  • **
  • Posts: 587
  • Country: us
Re: Some China PCB manufacturer recommend
« Reply #108 on: September 23, 2019, 01:46:16 pm »
I would just display the number of reviews next to the star rating for each supplier.

Great idea! I've added that!

Thanks,
   Bob
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf