EEVblog Electronics Community Forum
Electronics => Manufacturing & Assembly => Topic started by: MarkMoses on October 27, 2020, 06:33:18 pm
-
I'm having a heck of a time trying to find the crimper for these parts: SLPIPB50BNR2 & SLPIRBBPNR2
Digi-Key Part Number - 965-SLPIRBBPNR2-ND
Manufacturer - Amphenol Industrial Operations
Manufacturer Product Number - SLPIRBBPNR2
This is for 1/0awg or 50mm2 wire
I have some crimpers that are about the right size, but they are obviously not right when they crimp the part.
I have some e-mails out but I'm not getting much from the manufacurer.
Thanks in advance,
Mark
-
A little searching suggests the right tool for that is the TE0500 crimper + TE0500-011 die.
Bend over:
https://www.digikey.com/en/products/detail/amphenol-sine-systems-corp/TE0500/3918470 (https://www.digikey.com/en/products/detail/amphenol-sine-systems-corp/TE0500/3918470)
https://www.digikey.com/en/products/detail/amphenol-sine-systems-corp/TE0500-011/3918163 (https://www.digikey.com/en/products/detail/amphenol-sine-systems-corp/TE0500-011/3918163)
Obviously I'd get someone to confirm that's correct before splashing that sort of money on my guesswork..