Electronics > Manufacturing & Assembly

What do you think of this soldering product?

(1/2) > >>

coppercone2:
https://www.ebay.com/itm/363544063317

It looks interesting. Like a hotplate on a stick.

JURP:
I would like to see it under a thermal imager.
The temperature distribution will probably be "interesting".
But maybe it works.

tooki:

--- Quote from: JURP on March 24, 2024, 05:23:45 pm ---I would like to see it under a thermal imager.
The temperature distribution will probably be "interesting".
But maybe it works.

--- End quote ---
If it is actually solid copper, as they claim, the thermal conductivity will result in it being reasonably even. (I've used big desoldering block tips -- copper blocks with individual wells for every leg of an IC or connector -- to desolder 40-pin (2x20) connectors and various DIP ICs. They're also copper and they heat quite evenly.)

thm_w:
https://www.aliexpress.us/item/3256802213711642.html
https://www.aliexpress.us/item/3256805991670248.html

Quite a few variations of these.

I'd guess there is a decent temperature drop to the solid area, then once it gets there should be even, as tooki says. Once it heats up, which will take a minute.
You'll see just as much temperature drop from thin long tips.

tooki:

--- Quote from: thm_w on March 25, 2024, 09:27:48 pm ---https://www.aliexpress.us/item/3256802213711642.html
https://www.aliexpress.us/item/3256805991670248.html

Quite a few variations of these.

I'd guess there is a decent temperature drop to the solid area, then once it gets there should be even, as tooki says. Once it heats up, which will take a minute.
You'll see just as much temperature drop from thin long tips.

--- End quote ---
Huh? It's the exact opposite situation to a long thin soldering iron tip.

Navigation

[0] Message Index

[#] Next page