Has anyone purchased these machines from eBay? I've been looking at a few listings (ex https://www.ebay.com/itm/313260134355) and they say things like "Stock in USA" and free shipping, but I'm sure it can't be that easy...
YX list stuff in Europe as well on AliExpress but it is always weeks until they can ship so I doubt.
YX list stuff in Europe as well on AliExpress but it is always weeks until they can ship so I doubt.
I'm not super worried about shipping time, more just that I'll make the order and get surprised with like $3,000 in additional costs that were not listed anywhere.
It's also quite odd because the delivery estimate is quite optimistic, and if I remember right you only have 30 days after the expected delivery date to open a case with eBay.
Hello
I have a SMT550. There are some problems with the software. Now I have the problem, I assembled a printed circuit board and one component was missing. They unhook the component and he assembled it without a component. Which is also correct.
Now I have received the component and put the hook back in, BUT it no longer assembled this component.
What can be the problem?
Hello
I have a SMT550. There are some problems with the software. Now I have the problem, I assembled a printed circuit board and one component was missing. They unhook the component and he assembled it without a component. Which is also correct.
Now I have received the component and put the hook back in, BUT it no longer assembled this component.
What can be the problem?
Hello
I have a SMT550. There are some problems with the software. Now I have the problem, I assembled a printed circuit board and one component was missing. They unhook the component and he assembled it without a component. Which is also correct.
Now I have received the component and put the hook back in, BUT it no longer assembled this component.
What can be the problem?Hello Stefan,
this sometimes happens when the software shifts the part to group 0. You have to get it out of group 0 by adding it to another group.
Sort the parts by group after inboard check chips and then select the part in group 0. Now you can move it to another group using right mouse button.
Jan
I made another project for one feeder. on the machine ok, the test does not pass correctly https://youtu.be/4yCiSGUNQnE
good day! Became the owner of this equipment. I need help. chip SMT Test is not working correctly for me. he puts the element behind the board field. although in automatic mode everything is ok. what it could be. Sorry for my English. https://youtu.be/dVQElVn57pg