« previous next »
Pages: [1]   Go Down

Author Topic: Etching aluminium enclosures.  (Read 2682 times)

0 Members and 1 Guest are viewing this topic.

Offline ShivTopic starter

  • Regular Contributor
  • *
  • Posts: 56
  • Country: es
Etching aluminium enclosures.
« on: June 25, 2021, 11:41:50 am »
Hi all, I had some ferric acid (FeCl3) and I made this pedal for my brother.

Recipe:
1 part Ferric acid (mine is 39%) + 1 part hot water (about 50ºC)
Transfer made with brandless yellow transfer paper, if you have press & peel, should be easier.
About 50 minutes submerged upside down.


I´m happy with the result so here it is:
Logged
 
The following users thanked this post: fpliuzzi, Mark, thm_w, DrG

Offline esepecesito

  • Regular Contributor
  • *
  • Posts: 62
  • Country: de
Re: Etching aluminium enclosures.
« Reply #1 on: June 30, 2021, 05:05:43 pm »
Amazing. Thanks for sharing!
Logged
 
The following users thanked this post: Shiv

Offline Just_another_Dave

  • Regular Contributor
  • *
  • Posts: 192
  • Country: es
Re: Etching aluminium enclosures.
« Reply #2 on: July 03, 2021, 02:23:42 pm »
Wow! It looks amazing!
Logged
 
The following users thanked this post: Shiv
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee