Electronics > Mechanical & Automation Engineering

replacement controller

(1/5) > >>

atkinson:
Where in the world can I find a reasonably priced replacement controller?   :-/O
Complete working control box to suit CNC machine "CNC 6040 USB Mach3 2.2KW USB Controller".
The only ones I have seen advertised cost nearly the price of a complete CNC Machine.
Thanks
Norman

BMK:
What's the symptoms? These units are unfortunately invariably junk, but usually kind of modular and repairable.
Describe the problem and give a few internal photos.
You might also want to try mach3 specific forums.

atkinson:
Original unit was destroyed.
I was using the image to depict what was, but am open to buying any suitable controller.
Norman

thm_w:
Search "CNC control box" on Aliexpress and you'll find the same thing. The prices for the box alone are a lot less than the full machine ($2k+).
You haven't stated the cost of what you originally paid for the machine or a budget for the replacement box.

If you have time, build your own GRBL box.

atkinson:
Thank you for your reply.

I would like to try building my own grbl controller - (I am retired and time is something I have plenty of.)

However, my knowledge of a grbl. system is extremely limited. I will look for web pages referencing grbl and detailing the build process.

Norman

Navigation

[0] Message Index

[#] Next page